Neutron guide initiated using Virtual_mcnp_ss_input.comp, and replacing Virtual_mcnp_ss_output.comp - see examples//Test_SSR_SSW_Guide.instr
Author: Esben klinkby and Peter Willendrup
Origin: Risoe-DTU
Date: Marts 2012
Based on Kristian Nielsens Guide.comp Models a rectangular guide tube centered on the Z axis. The entrance lies in the X-Y plane. The component must be initiated after Virtual_mcnp_ss_input.comp, and replaces Virtual_mcnp_ss_output.comp - see examples/Test_SSR_SSW_Guide.instr. The basic idea is, that rather than discarding unreflected (i.e. absorbed) neutrons at the guide mirrors, these neutron states are stored on disk. Thus, after the McStas simulation a MCNP simulation can be performed based on the un-reflected neutrons - intended for shielding studies. (details: we don’t deal with actual neutrons, so what is transferred between simulations suites is neutron state parameters: pos,mom,time,weight. The latter is whatever remains after reflection.
For details on the geometry calculation see the description in the McStas reference manual. The reflectivity profile may either use an analytical mode (see Component Manual) or a 2-columns reflectivity free text file with format
[q(Angs-1) R(0-1)].
Example: Virtual_mcnp_ss_Guide(w1=0.1, h1=0.1, w2=0.1, h2=0.1, l=2.0,
R0=0.99, Qc=0.021, alpha=6.07, m=2, W=0.003
%VALIDATION Upcomming in 2012 based on ESS shielding Validated by: D. Ene & E. Klinkby
%BUGS This component does not work with gravitation on. Use component Guide_gravity then (doesn’t work with SSR/SSW unfortunately)
Parameters in boldface are required; the others are optional.
|
Name |
Unit |
Description |
Default |
|
|
|||
|
reflect |
str |
Reflectivity file name. Format <q(Å-1) R(0-1)> |
0 |
|
w1 |
m |
Width at the guide entry |
|
|
h1 |
m |
Height at the guide entry |
|
|
w2 |
m |
Width at the guide exit |
|
|
h2 |
m |
Height at the guide exit |
|
|
l |
m |
length of guide |
|
|
R0 |
1 |
Low-angle reflectivity |
0.99 |
|
Qc |
Å\(^{-1}\) |
Critical scattering vector |
0.0219 |
|
alpha |
Å |
Slope of reflectivity |
6.07 |
|
m |
1 |
m-value of material. Zero means completely absorbing. |
2 |
|
W |
Å\(^{-1}\) |
Width of supermirror cut-off |
0.003 |
|
|
|||
|
|
|||
|
|
|||
Component source code found in file Virtual_mcnp_ss_Guide.comp.